Install Slackware Using A USB Flash Drive: Difference between revisions
| Line 48: | Line 48: | ||
The following command will overwrite all the files currently present on the USB drive with a bootable iso | The following command will overwrite all the files currently present on the USB drive with a bootable iso | ||
dd if= | dd if=/path/to/iso of=/path/to/usb (example of=/dev/sdX) | ||
PS1. dd expects the name of a device, not a partition, so you should use eg. /dev/sdb instead of /dev/sdb1. | PS1. dd expects the name of a device, not a partition, so you should use eg. /dev/sdb instead of /dev/sdb1. | ||
Revision as of 19:44, 27 October 2018
Installing Slackware using a USB flash drive is very easy.
Slackware includes a usbboot.img in the usb-and-pxe-installers directory of the official installation media, which is a minimal image very handy for FTP or other kinds of network installations.
In the same directory one can also find usbimg2disk.sh, a script that will dump the usbboot.img image to a flash drive, useful in case the above image does not work for you out of the box.
Additionally, AlienBOB has written two articles in his blog on how to install Slackware using a USB flash drive from either
This document describes yet another way of creating an image capable of booting from USB, containing all of the packages neeeded for an installation, using Isohybrid.
Prerequisites
A USB flash drive that can fit the ISO image (4GB or larger)
Additionally you should either have:
a) official Slackware installation media, preferably the DVD ISO available on any Slackware mirror
or
b) a local copy of the Slackware tree.
That may be the tree of a stable release, or even the tree of the Slackware current development cycle.
If you choose to use a local copy of the tree you should be able to create your own ISO image using a script such as:
Pat's DVD script, AlienBOB's mirror-slackware-current script or even a custom one of your own.
Copy the ISO to the USB flash drive
All that is left to do now is copy the ISO to the USB flash drive.
This can be done using the dd command as the root user.
to identify the designation of your usb stick/drive use
fdisk -l
dd will write the iso to whatever drive you tell it to so make double sure you have the right drive designation in the following command
The following command will overwrite all the files currently present on the USB drive with a bootable iso
dd if=/path/to/iso of=/path/to/usb (example of=/dev/sdX)
PS1. dd expects the name of a device, not a partition, so you should use eg. /dev/sdb instead of /dev/sdb1.
PS2. the USB drive should NOT be mounted during dd invocation.
Installation
Boot the machine using the USB drive.
Before running setup, look up (with fdisk -l) which device your USB drive is. When installing, choose "Install from a Slackware CD or DVD". Then select the "manual" option, then the "custom" option. Enter /dev/sdX1 (as shown by "fdisk -l") and installation will proceed as when installing from a DVD.
Install with Unetbootin
It is possible to install with unetbootin. Download the Slackware iso image of your choice and then install to a USB drive using unetbootin. Tutorials for unetbootin are everywhere. Then, when you get to the SOURCE option in setup use the drive you are installing slackware from (usually it is /dev/sdb1). When it asks where the packages are, enter /slackware for 32 bit or /slackware64 for 64 bit. This was tested using the Slackware 14.0 64-bit x86_64 iso.