PPTP (Poptop)

From SlackWiki
Revision as of 14:38, 30 August 2012 by Arfon (talk | contribs) (Moved from Pptp)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

(Poptop) pptpd Server Setup

Here's what I did to get Poptop pptpd (1.3.4) running on my Slackware (13.37) box.

1) Install the official Slackware ppp package using pkgtool or slackpkg.

2) Install the ppptpd package from Slackbuilds.org using sbopkg.
	***NOTE: The package name is NOT Poptop, it's pptpd***

3) Edit /etc/pptpd.conf

		option /etc/ppp/options.pptpd -> option /etc/ppp/options

4) Edit /etc/ppp/options
	HERE IS A GOTCHA- The official Slackware ppp package (at the time of this writing) contains an error in the options
	file. The pppd binary was compiled to look for the new ms-dns parameter but the option file has the old dns-addr

	# dns-addr -> ms-dns (or whatever your dns server is)

5) Edit the /etc/ppp/chap-secrets file.
	For some reason, the default Slackware package has 4 example entries in it that are not commented (jacco,*,sam,*)
	delete these.  You don't want jacco or sam to have a free connection into your box...

	ADD: one entry for each user you want to allow access.
	Format is: CLIENT [tab] SERVER [tab] PASSWORD [tab] IP ADDRESS
	Mine looks like this:

	bob	*	"BobsPasswordIsStrong"	*
	sue	*	"FluffyBunnies92"	*

6) Finally to start pptpd, normally you would just execute 'pptpd &' but being that I'm a good Slacker, I wrote an
rc.pptpd script.
	Create /etc/rc.d/rc.pptpd
		# /etc/rc.d/rc.pptpd
		# Start/stop/restart the pptpd server.
		# To make PopTop start automatically at boot, make this
		# file executable:  chmod 755 /etc/rc.d/rc.pptpd
		pptpd_start() {
		  if [ -x /usr/sbin/pptpd ]; then
		    echo "Starting PopTop pptpd:  /usr/sbin/pptpd server.conf"
		    /usr/sbin/pptpd &
		pptpd_stop() {
		  killall pptpd
		pptpd_restart() {
		  sleep 2
		case "$1" in
		  # Default is "start", for backwards compatibility with previous
		  # Slackware versions.  This may change to a 'usage' error someday.

7) Make it executable (and autobootable on start up)

	chmod 755 /etc/rc.d/rc.pptpd

To start it manually- /etc/rc.d/rc.pptpd start

To be useful you next need to configure your firewall to forward and masquerade traffic from the vpn out to
the world...

8) Edit/create: /etc/rc.d/rc.firewall

		iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
		iptables -A FORWARD -i ppp+ -j ACCEPT
		iptables -A FORWARD -o ppp+ -j ACCEPT
		iptables -A FORWARD -j ACCEPT
		iptables -t nat -A POSTROUTING -s -o ppp+ -j MASQUERADE

9) Make it executable

	chmod 755 /etc/rc.d/rc.firewall

10) Flush the old firewall rules (forgetting to do this caused me all sorts of grief (Thanks mancha))

	iptables -F

11) Execute the new firewall rules


If you and I haven't made any mistakes, you should now have pptp (server) and router working on your box.

pptp Client Setup

Needs to be added.