Madwifi
Latest CVS is 09-Jul-2005 02:35
Instalsi
Konfigurasi
cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/madwifi \ co madwifi
iwconfig Options
iwconfig --help
Usage: iwconfig interface [essid {NN|on|off}]
[nwid {NN|on|off}]
[mode {managed|ad-hoc|...}
[freq N.NNNN[k|M|G]]
[channel N]
[sens N]
[nick N]
[rate {N|auto|fixed}]
[rts {N|auto|fixed|off}]
[frag {N|auto|fixed|off}]
[enc {NNNN-NNNN|off}]
[power {period N|timeout N}]
[txpower N {mW|dBm}]
[commit]
iwconfig ath0 essid ''avalon'' iwconfig ath0 key ''1234567890'' iwconfig ath0 channel ''13'' iwconfig ath0 rate ''10MB'' iwconfig ath0 ap ''11:22:33:44:55:66''
iwlist Options
iwlist --help
Usage: iwlist [interface] frequency
[interface] channel
[interface] ap
[interface] accesspoints
[interface] peers
[interface] bitrate
[interface] rate
[interface] encryption
[interface] key
[interface] power
[interface] txpower
[interface] retry
[interface] scanning
iwpriv Options
iwpriv ath0
ath0 Available private ioctl :
setoptie (8BE8) : set 256 byte & get 0
getoptie (8BE9) : set 0 & get 256 byte
setkey (8BE2) : set 60 byte & get 0
delkey (8BE4) : set 7 byte & get 0
setmlme (8BE6) : set 10 byte & get 0
addmac (8BEA) : set 1 addr & get 0
delmac (8BEC) : set 1 addr & get 0
chanlist (8BEE) : set 32 byte & get 0
setparam (8BE0) : set 2 int & get 0
getparam (8BE1) : set 1 int & get 1 int
turbo (0001) : set 1 int & get 0
get_turbo (0001) : set 0 & get 1 int
mode (0002) : set 1 int & get 0
get_mode (0002) : set 0 & get 1 int
authmode (0003) : set 1 int & get 0
get_authmode (0003) : set 0 & get 1 int
protmode (0004) : set 1 int & get 0
get_protmode (0004) : set 0 & get 1 int
mcastcipher (0005) : set 1 int & get 0
get_mcastcipher (0005) : set 0 & get 1 int
mcastkeylen (0006) : set 1 int & get 0
get_mcastkeylen (0006) : set 0 & get 1 int
ucastciphers (0007) : set 1 int & get 0
get_uciphers (0007) : set 0 & get 1 int
ucastcipher (0008) : set 1 int & get 0
get_ucastcipher (0008) : set 0 & get 1 int
ucastkeylen (0009) : set 1 int & get 0
get_ucastkeylen (0009) : set 0 & get 1 int
keymgtalgs (0015) : set 1 int & get 0
get_keymgtalgs (0015) : set 0 & get 1 int
rsncaps (0016) : set 1 int & get 0
get_rsncaps (0016) : set 0 & get 1 int
roaming (000C) : set 1 int & get 0
get_roaming (000C) : set 0 & get 1 int
privacy (000D) : set 1 int & get 0
get_privacy (000D) : set 0 & get 1 int
countermeasures (000E) : set 1 int & get 0
get_countermeas (000E) : set 0 & get 1 int
dropunencrypted (000F) : set 1 int & get 0
get_dropunencry (000F) : set 0 & get 1 int
wpa (000A) : set 1 int & get 0
get_wpa (000A) : set 0 & get 1 int
driver_caps (0010) : set 1 int & get 0
get_driver_caps (0010) : set 0 & get 1 int
maccmd (0011) : set 1 int & get 0
wme (0012) : set 1 int & get 0
get_wme (0012) : set 0 & get 1 int
hide_ssid (0013) : set 1 int & get 0
get_hide_ssid (0013) : set 0 & get 1 int
ap_bridge (0014) : set 1 int & get 0
get_ap_bridge (0014) : set 0 & get 1 int
inact (0017) : set 1 int & get 0
get_inact (0017) : set 0 & get 1 int
inact_auth (0018) : set 1 int & get 0
get_inact_auth (0018) : set 0 & get 1 int
inact_init (0019) : set 1 int & get 0
get_inact_init (0019) : set 0 & get 1 int
Locking to a Specific Mode
* iwpriv ath0 mode 1 To lock to 11a only.
* iwpriv ath0 mode 2 To lock to 11b only.
* iwpriv ath0 mode 3 To lock to 11g only.
* iwpriv ath0 mode 0 (default) autoselect mode.
Changing Authentication Mode.
* iwpriv ath0 authmode 1 To use open authentication.
* iwpriv ath0 authmode 2 To use shared key authentication.
* iwpriv ath0 authmode 3 To use 802.1x authentication.
Manipulating the MAC white/black list
* iwpriv ath0 maccmd 3 To clear the MAC list.
* iwpriv ath0 maccmd 1 To make the list a whitelist.
* iwpriv ath0 maccmd 2 To make the list a blacklist.
* iwpriv ath0 addmac 00:11:22:33:44:55 To add a mac address to the list.
* iwpriv ath0 delmac 00:11:22:33:44:55 To delete a mac from the list.
Changing ESSID Visible Mode
* iwpriv ath0 hide_ssid 0 << ====== To make ESSID visible
* iwpriv ath0 hide_ssid 1 << ====== To hide ESSID
iwspy Options
iwspy --help Usage: iwspy interface [+] [MAC address] [IP address]
Contoh
Installing Madwifi on Slackware
Pre Install Steps:
cd /usr/src/sourcepkg wget http:// cd .. tar jxvf sourcepkg/madwifi-current.tar.bz2 cd madwifi make make install modprobe ath_pci lspci | grep ath
Post Install Steps:
1. After the module is loaded and your ath0 interface is up, run ifconfig and get the MAC address of ath0. 2. Edit /etc/rc.d/rc.wireless.conf and comment out the section beginnning with “*)” 3. Below the lines you commented in /etc/rc.d/rc.wireless.conf add something like this:
00:0F:3D:A9:97:90)
INFO="D-LINK DWL-G650"
ESSID="avalon"
KEY="6281321313252"
;;
Your MAC address, ESSID, KEY and info comment are obviously going to be different.
1. Run “/etc/rc.d/rc.wireless” and then “dhcpcd ath0” which should be enough to get you up and running. 2. Check your settings if you want “ifconfig” and “iwconfig.”
There are relatively easy ways to get slackware to bring up your interface:
1. Put an “ifconfig ath0” statement at the bottom of /etc/rc.d/rc.local
2. update your slackware to slackware-current, our pat has understand what whee need :-)
upgrade your packages to lates n/tcpip and n/wireless-tools
3. If you’re using hotplug, you can have it automatically bring up the interface by editing
/etc/hotplug/net.agent and inserting the following lines in the “case add|register)” branch:
ath*)
dhcpcd -n $INTERFACE % If you use dhcp for the interface
% or if you prefer to just hardcode your interface, put your ifconfig statement here.
% ifconfig ath0 192.168.1.1 netmask 255.255.255.0 ...
;;
In the remove|unregister branch it will automatically bring down dhcpcd if running.