Kernel-packaging
Creating a Custom Package of Kernel and Modules
- Note: This tutorial assumes that you know how to compile a kernel already. It only looks at a way of creating a package and doesn't aim to show kernel config options.
For info on compiling pleae look at these pages:
Kernel Output Target Option
The usual way to make any sort of package is via the $DESTDIR variable. The kernel doesn't use this however, but it does have an O switch which does almost the same thing, although the output might not be exactly what you expect. I will not be using that option here, but see the discussion page about that.
Building
Copy your .config into the source directory and do
make menuconfig
(or whichever method you prefer.)
You may need to do 'make mrproper' first, and perhaps 'make oldconfig'.
make
- Note: Do not use 'make install' or 'make modules_install', even with O switch, as this *will* install to /boot and /lib/modules.
At this point everything we need is in the source directory. The file modules.order lists the modules to be installed and that we can use to help us make a package.
Installing Modules and Kernel to our Package Directory
Ok let's use /tmp/kernel-package for our package directory. Also let's assume a 2.6.29.6 kernel with jabberwok as local name. A little bash will copy our modules to it:
for i in $(sed "s#^kernel/##" modules.order)
do
mkdir -p /tmp/kernel-package/lib/modules/2.6.29.6-jabberwok/$(dirname $i)
install -m 644 -v $i /tmp/kernel-package/lib/modules/2.6.29.6-jabberwok/$(dirname $i)
done
Now we need the kernel and associated files.
mkdir /tmp/kernel-package/boot cp arch/x86/boot/bzImage /tmp/kernel-package/boot/vmlinuz-2.6.29.6-jabberwok cp System.map /tmp/kernel-package/boot/System.map-2.6.29.6-jabberwok cp .config /tmp/kernel-package/boot/config-2.6.29.6-jabberwok
And then the doinst.sh and slack-desc.
mkdir /tmp/kernel-package/install
doinst.sh:
## Taken from stock modules package if [ -x sbin/depmod ]; then chroot . /sbin/depmod -a 2.6.29.6-jabberwok > /dev/null 2> /dev/null fi ( cd lib/modules/2.6.29.6-jabberwok ; rm -rf build ) ( cd lib/modules/2.6.29.6-jabberwok ; ln -sf /usr/src/linux-2.6.29.6-jabberwok build ) ( cd lib/modules/2.6.29.6-jabberwok ; rm -rf source ) ( cd lib/modules/2.6.29.6-jabberwok ; ln -sf /usr/src/linux-2.6.29.6-jabberwok source )
I'll leave you to figure out the slack-desc. It should be copied into the install/ directory and appname ought to be (going by this example) kernel-jabberwok.
Making the Package
cd /tmp/kernel-package /sbin/makepkg -l y -c n /tmp/kernel-jabberwok-2.6.29.6-i686-1_tag.txz
Change '_tag' to your usual moniker. Hopefully we now have a package in /tmp. Copy it to a temporary directory somewhere, explodepkg it and check the contents. We don't want to install something with messed up paths etc. If all is well we can installpkg it.
As usual, edit your /etc/lilo.conf and add an option for the new kernel, keeping the old kernel entry in place for safety, then run lilo.
A Little Automation
Of course this would be easier to control with a script rather than typing in these commands manually and trying not to make typos. Here is the script that I've been using (run make menuconfig first):
#!/bin/sh
# Slackware build script for kernel and modules
#
# Copyright 2009-2010 David Woodfall <dave@dawoodfall.net>
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AS IS AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Notes:
# You should have a /usr/src/linux-$VERSION-$LOCALNAME of source or you will
# have problems.
# Do not omit setting localname in .config.
source ./.config
LOCALNAME=${LOCALNAME:-${CONFIG_LOCALVERSION/-/}}
if [ -z "$ARCH" ]; then
case "$( uname -m )" in
i?86) ARCH=i486 ;;
arm*) ARCH=arm ;;
*) ARCH=$( uname -m ) ;;
esac
fi
KARCH=$ARCH
ARCH=x86
MODULELIST=modules.order
PRGNAM=kernel
VERSION=${VERSION:-2.6.29.6}
BUILD=${BUILD:-1}
TAG=${TAG:-_daw}
OUTPUT=${TMP:-/tmp}
PKG=$OUTPUT/$PRGNAM-$LOCALNAME-$VERSION
MODDIR=$PKG/lib/modules/$VERSION-$LOCALNAME
set -e
rm -rf $PKG
make
for i in $(sed "s#^kernel/##" $MODULELIST)
do
mkdir -p $MODDIR/$(dirname $i)
install -m 644 -v $i $MODDIR/$(dirname $i)
let nummods=$nummods+1
done
mkdir -p $PKG/install
cat << EOF > $PKG/install/doinst.sh
## Taken from stock modules package
if [ -x sbin/depmod ]; then
chroot . /sbin/depmod -a $VERSION-$LOCALNAME > /dev/null 2> /dev/null
fi
( cd lib/modules/$VERSION-$LOCALNAME ; rm -rf build )
( cd lib/modules/$VERSION-$LOCALNAME ; ln -sf /usr/src/linux-$VERSION-$LOCALNAME build )
( cd lib/modules/$VERSION-$LOCALNAME ; rm -rf source )
( cd lib/modules/$VERSION-$LOCALNAME ; ln -sf /usr/src/linux-$VERSION-$LOCALNAME source )
EOF
cat << EOF > $PKG/install/slack-desc
# HOW TO EDIT THIS FILE:
# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
$PRGNAM-$LOCALNAME|-----handy-ruler------------------------------------------------------|
$PRGNAM-$LOCALNAME: kernel and modules for $LOCALNAME-$VERSION
$PRGNAM-$LOCALNAME:
$PRGNAM-$LOCALNAME: Jabberwokky type kernel!
$PRGNAM-$LOCALNAME:
$PRGNAM-$LOCALNAME:
$PRGNAM-$LOCALNAME:
$PRGNAM-$LOCALNAME:
$PRGNAM-$LOCALNAME:
$PRGNAM-$LOCALNAME:
$PRGNAM-$LOCALNAME:
$PRGNAM-$LOCALNAME:
EOF
mkdir -p $PKG/boot
cp arch/x86/boot/bzImage $PKG/boot/vmlinuz-$VERSION-$LOCALNAME
cp System.map $PKG/boot/System.map-$VERSION-$LOCALNAME
cp .config $PKG/boot/config-$VERSION-$LOCALNAME
ksize=$(ls -l arch/x86/boot/bzImage | awk '{print $5}')
cd $PKG
PACKAGE=$OUTPUT/$PRGNAM-$LOCALNAME-$VERSION-$KARCH-$BUILD-$TAG.${PKGTYPE:-tgz}
/sbin/makepkg -l y -c n $PACKAGE
echo -ne '\e[01;34m'
printf "$nummods Modules Built\n"
printf "Kernel Size: $ksize\n"
printf "Package Size: $(ls -l $PACKAGE | awk '{print $5}')\n\n"
echo -ne '\e[m\017'
Downloadable version: http://www.dawoodfall.net/slackbuilds/noversion/kernel/
Conclusion
The aim for doing this was to be able to build a kernel for my old T42 on my desktop box using the T42's .config. It could be possible to split up kernel and modules into separate packages but I'll let you figure out the details.
At the end of the day, this helped me to compile a kernel without my laptop getting even warm, which was the point of the project.
--Dive 04:31, 11 March 2010 (UTC)